管金談
概要
作品: | 26 作品在 26 項出版品 1 種語言 |
---|
書目資訊
自由浮動模具鍛造成形材料流動之研究 = Study on the material flow of forging process with axially freely floating container
by:
管金談; 黃國洲
(書目-語言資料,印刷品)
高速切削刀桿動平衡配重設計之探討 = An investigation of balancing design of a high speed tool holder
by:
管金談; 陳俊良
(書目-語言資料,印刷品)
結合類神經網路與FEM作鑿刀熱鍛製程設計之研究 = Study on process parameter prediction of chisel hot forging by AIM and FEM
by:
管金談; 陳煜欣
(書目-語言資料,印刷品)
結合類神經網路與有限元素法作橢圓內凸緣成形胚料輪廓最佳化設計 = Application of abductive network and FEM to predict the optimal blank coutour of an elliptic inner flange form stretching
by:
張瑞彩; 管金談
(書目-語言資料,印刷品)
孔凸緣輾薄成形製程參數分析之研究 = Study on the analysis of the process parameters of an ironing hole-flange
by:
林恒任; 管金談
(書目-語言資料,印刷品)
鈑金彎曲成形模具形狀最佳化設計之研究 = Study on the die design optimization of springback for a sheet bending process
by:
管金談; 陳姵妏
(書目-語言資料,印刷品)
鑄造用保麗龍消失模設計與製作之探討 = Investigation on the die design and manufacture of evaporative casting process with styrofoam
by:
林清田; 管金談; 薛仁科
(書目-語言資料,印刷品)
熱收縮刀桿產品開發之探討 = An investigation of the product development of a shrink-fit tool holder
by:
廖家鋒; 管金談
(書目-語言資料,印刷品)
方形孔熱鍛模預應力環最佳化設計之探討 = A pre-stress die design method for rectangular shape hole hot forging by FE analysis
by:
劉鍵燁; 管金談
(書目-語言資料,印刷品)
沖頭形狀對方管沖剪製程之影響分析 = Effect of punch shapes on press cutting of a square pipe
by:
管金談; 詹凱翰
(書目-語言資料,印刷品)
長方孔內凸緣成形胚料設計與成形性分析 = Blank contour design and formability analysis of a rectangular inner flanging
by:
朱清流; 李居璋; 管金談
(書目-語言資料,印刷品)
鍛造模具預應力最佳化設計之研究 = Study on the optimal prestressed die design of forging die
by:
王俊欽; 管金談
(書目-語言資料,印刷品)
具輕壓痕之L柄熱鍛彎模具設計探討 = An investigation of the hot bending die design of an L handle bar with a light pressing scar
by:
楊烈岱; 江明杰; 管金談
(書目-語言資料,印刷品)
鉻鉬鋼管單車架液壓成形製程設計之研究 = Study on the process design of tube hydroforming of bicycle frame from cr-mo steel tubes
by:
李英全; 林炎成; 管金談
(書目-語言資料,印刷品)
更多
較少的
主題
VDI Static Tool Holder
數值分析
circular rod bending
熱收縮型刀桿
軸對稱冷間鍛造
finite element method
有限元素分析
Chisel Hot Forging
機件- 問題集
凸緣輾薄成形
最佳化設計
VDI固定刀座
材料力學
鈑金彎曲成形
高速切削刀桿
abductive network
氣動鑿刀
鑄造模
Non-Axisymmetric Deep Drawing
類神經網路
pre-stress ring design
資料處理
刀桿
Finite element simulation
ironing hole-flanging
Die casting
非軸對稱深引伸
High-speed cutting tool holder
shrink-fit tool holder
圓桿鍛彎
tool holder